Rubber Technology Handbooks Set

200.00 US $

Category:

Description

BOOK SET (300 US$) (promotional offer deadline: 28 Feb 2020)
******************************************
Handbook – Rubber Technology 2018
Handbook – Rubber Technology 2019
Handbook – Rubber & Tire Technology
******************************************
Joint Publication of Rubber World & TechnoBiz
******************************************

CONTENTS- Handbook – Rubber Technology 2018
Publisher: Rubber World & TechnoBiz
Pages: 210 pages, Soft Cover

The contents of this handbook include all the technical articles published in the Rubber World Magazine in the year 2018.

Prediction of Rolling Resistance Factor (RRF) for Conveyor Belt Cover Compounds with a Rebound Resilience Tester
S.L. Agrawal, B.B. Sharma and Virendra Rathod, Reliance Industries Ltd., India

Characterization of Rubber Polymers and Compounds
Alina K. Latshaw and Thomas Rauschmann, TA Instruments Waters

Rheology of EPDM Compounds made of Equal Mooney, Equal Composition Polymers: Differentiation beyond typical EPDM Parameters
Juan Tuberquia, Colin Li Pi Shan, Sharon Wu, Greg Li, Lena Nguyen, Teresita Kashyap, Tianzi Huang, David Gillespie, Cory Thomas and Kristel Blackwell, Dow Chemical

Characterizing Rubber’s Resistance against Chip and Cut Behavior
Radek Stocek, PRL Polymer Research Laboratory and Tomas Bata University, Czech Republic; William V Mars and Christopher G Robertson, Endurica LLC; and Reinhold Kipscholl, Coesfeld GmbH & Co. KG, Germany

Six Rules of Thumb for Rubber Release Agents
Bob Edelmayer, McLube Release Coatings

Advancing Carbon Black Technologies to Improve Tire Performance
Lin Bradley and Jose Briones, Orion Engineered Carbons

Mechanical Reinforcement of Rubber by SP2 Carbon Allotropes such as Carbon Black and Carbon Nanotubes: The Role of Interfacial Area and Filler Orientation
Maurizio Galimberti, Giuseppe Infortuna, Vincenzina Barbera, Silvia Guerra and Andrea Bernardi, Politecnico di Milano; and Silvia Agnelli and Stefano Pandini, Universitá degli Studi di Brescia, Italy

Why Titanates and Zirconates may be Better Adhesion Promoters than Silanes for Silica and Carbon Reinforced Polymeric Composition
Salvatore J. Monte, Kenrich Petrochemicals

Optimization of the Silica/Polymer Interface in the case of Very High Surface Silica: New Methods to Support Formulation Adjustments for Passenger Car and Truck Tire Treads
Laurent Guy and Thomas Chaussée, Solvay, France

Powder Liquid Dispersions of Plasticizers to Increase Throughput and Meet Sustainability Goals for Tire Tread Formulations
Dejan Andjelkovic, Bradley Pentzien and Stephen O’Rourke, Hallstar

Silica Mixing
Richard J. Jorkasky II, Kobelco Stewart Bolling

Predispersed Short Fibers: A Cost-Effective Way to Reinforce Rubber Compounds
Joel Neilsen, Steven Monthey and Cristian Oprisoni, Lanxess

Keltan defining EPDM for the Past and the Next 50 Years (Part 1)
Martin van Duin, Gerard van Doremaele and Niels van der Aar, Arlanxeo Performance Elastomers

AEM Compounds: Recent Developments in Fluid Aging
Edward McBride, Serge Bouvier and Klaus Kammerer, DuPont Performance Materials

Swelling Characteristics of Fluorocarbon Rubber in Gasoline Blended with Ethanol: Relation to Vulcanizate Thickness
S.N. Chakravarty, Polym Consultants, India

Keltan defining EPDM for the Past and the Next 50 Years (Part 2)
Martin van Duin, Gerard van Doremaele and Niels van der Aar, Arlanxeo Performance Elastomers

Non-Dispersible Matter Test of Carbon Black most Accurately Predicts Extruded Profile Surface Quality
Stephan Mueller, Orion Engineered Carbons

Thermal Carbon Black (N-990) for Processing Performance in Architectural Sealing
Rick Ziebell and Matt Rogers, R.D. Abbott

X-Ray Technology Reliably ensures Quality during the Production of Rubber Hoses
Katja Giersch, Sikora AG

Considerations for Specifying Silicone  Elastomers in Medical Applications
Robert Umland and Brian Reilly, Avantor/NuSil Advanced Silicone Materials

Soft Tissue Compliant Silicones for Medical Devices
Jonathan Goff, Santy Sulaiman, Alison Philips, Max Detwiler and Barry Arkles, Gelest

Addition Cure HCR: Impact of Inhibitors on the Elastomer Cure Profile
Charles Olsen, Jr. and Hans Haas, AB Specialty Silicones,and George Stamper, Hexpol

Evaluation of Silicone Reclaim for HCR Compounds
Erick Sharp, Ace Products and Consulting

Development of a Novel Vulcanization Test and Measuring System to Support Process Optimization in Continuous Vulcanization
Christian Hopmann, Florian Lemke, Jan Philip Peter and Patrick Gahlen, Institute of Plastics Processing (IKV), and Jens Möckel, Gerlach Maschinenbau GmbH

Miniduplex: A Calender Line Solution Integrated in The Industry 4.0 Concept
Mario Sacchi, Comerio Ercole

Electromechanical Actuators provide a New Spin on Tire Manufacturing Methodology
Tom Schreier, Exlar, Curtiss-Wright Sensors & Controls

 Achieving Better Productivity and Long-Term Operational Cost Savings with the Next Generation of Insoluble Sulfur: Crystex Cure Pro
Frederick Ignatz-Hoover, Eastman Chemical

Impact of Rubber Conformation on its Metal Bonding Strength
Mahmoud Kardan, Vernay

Evaluation of Computer Aided Rubber Compound Development
Hans-Joachim Graf, TechnoBiz Group (H-JG Consulting)

Dutral Grades Developed for Automotive Weatherstrip Application
Latorraca, S. Balestrieri and P. Piancastelli, Versalis S.p.A.

Developing an Effective Quality Program for Imported Tires
Bruce Lambillotte, Smithers Rapra and Chad Mowery, Roetzel & Andress, LPA

Suremix Game Changing Technology for Highly Loaded Silica Compounds
Rikki Lamba, Aaron Puhala, Vince Cremona, Matthew Finkelhor and Christine Dunlop, Polymer Solutions Group

Productivity and Quality Challenges
Massimo Lenti, Marangoni Tyre Machinery

Simple Solutions to Common Anti-Tack Problems
Howard Kennedy, Blachford

Shape Memory Thermoplastic Elastomers
Kevin Cavicchi, University of Akron

Beyond the Toothbrush Grip: New Overmolding TPEs in Applications with Unique Requirements
Long Zhang, Kushal Bahl and Elizabeth Ponte, Teknor Apex

Novel Developments in Vibration Damping Thermoplastic Elastomers
Jiren Gu, PolyOne

High Quality Visible Parts in a Single Step
Christoph Handorfer, Thomas Leng and Peter Egger, Engel Austria GmbH; Alexander Frank, Hennecke GmbH; Manuel Seiz, Votteler Lackfabrik GmbH; and Gerald Schofer, Schofer GmbH

Comparison of Silica-NR Masterbatches with In-Situ Silica/Silane Compounds
Suyanti Hersanto, Wisut Kaewsakul, Wilma K. Dierkes and Anke Blume, University of Twente, The Netherlands; and Joachim Bertrand, Behn Meyer Europe GmbH

Characterization of Composites Containing Renewable Fillers for Anti-Vibration Applications
Cindy Barrera and Janice Tardiff, Ford Motor

Specialty Latex Material for Sustainable Product Applications
M.R. Fatimah Rubaizah, M.Y. Amir Hashim, Y. Nurul Hayati, A. Mohamad Asri, R. Roslim and A.B. Rohani, Malaysian Rubber Board

Improvement of Natural Rubber/Silica Interaction by Silane Grafting of the Polymer
Karnda Sengloyluan, Jacques W.M. Noordermeer, Kannika Sahakaro, Wilma K. Dierkes amd Anke Blume, University of Twente

Controlled Viscosity Injection Molding: Limitations of the Conventional Injection Molding Process
Rick Fitzpatrick, Extrude to Fill

Molding Methods for Silicone with a Focus on Transfer Molding of Heat Cured Rubber
Lynn Momrow-Zielinski, Extreme Molding

Operating Window in Injection Molding with Nine Experiments
Hans-Joachim Graf, TechnoBiz Group (H-JG Consulting)

******************************************
CONTENTS – Handbook – Rubber Technology 2019
Publisher: Rubber World & TechnoBiz
Pages: 260 pages, Soft Cover
*********************************************************************************************************
The contents of this handbook include all the technical articles published in the Rubber World Magazine in the year 2019.
*********************************************************************************************************
Better Products demand Better Testing
Kayla Thackeray and Stephanie Williams, Instron
Rheological Characterization of Mixing Effects on Natural Rubber using RPA
Alina Latshaw, Sandeep Reddy and Thomas Rauschmann, TA Instruments
High Strain Rate Testing of Elastomers and Thermoplastic Elastomers
Sean Teller, Veryst Engineering
ASTM D945-16 and the AYO-IV Yerzley Mechanical Oscillograph can Improve Rubber Compounding and Molding Operations
Ismail Saltuk and Nuri Akgerman, Tavdi Company; Chris Stevens, NGF Europe Limited; and Cihan Cengiz, Tekno Kaucuk
Understanding Devulcanization, the Path to a Circular Economy and Potential Market Impact
Costas Tzoganakis, University of Waterloo, and Jon Visaisouk, Tyromer
Dispersion of Polyethylene Imine-Coated Chopped Fibers in Rubber Matrix
Charles O. Kerobo, Prabodh Varanasi and Dennis Berry, BASF, and Kylie Knipp, Akron Rubber Development Laboratory
Improved Off-The-Road Tire Formulations with Discrete Surface Functionalized Multiwall Carbon Nanotubes: Correlating Wear, Abrasion and Tear Resistance with Cut and Chip to Predict Lifetime
Sateesh Peddini and August Krupp, Molecular Rebar Design,LLC
Benefits of Highly Dispersible Silica in Truck/Bus Tires and Retread
Thomas Chaussée and Laurent Guy, Solvay
Luperox Air Organic Peroxides: New Peroxide Systems for Crosslinking EPDM in Hot Air
Leonard H. Palys, William Pavlek, Alfredo Defrancisci and Susan Sorbo, Arkema
Novel POSS Coagent Additives for HNBRs
Robert Ou, National Oilwell Varco, and Joseph D. Lichtenhan, Hybrid Plastics
Processing of AEM Compounds: Scorch Issues
Edward McBride, DuPont Transportation and Advanced Polymers
EPDM Polymers for Automotive Applications
Solomon Tang, Willie Burton, Russ Vogelsong and Yuka Kimoto, Lion Elastomers
New HNBR Elastomers with Improved Fluid Resistance and Low Temperature Flexibility
Victor Nasreddine, Sarah David, Andreas Kaiser and Susanna Lieber, Arlanxeo
New Generation HT-ACM Technologies for Highly Demanding Automotive Applications
Samuel C. Harber, Zeon Chemicals L.P.
Nordel EPDM Technical Solution for Automotive Dense Weatherstrip
Greg Li, Santosh Bawiskar, Rennisha Wickham, Wenzhao Yang, Sharon Wu and Lena Nguyen, Dow Chemical
New Developments in Ethylene Vinyl Acetate Rubber (EVM)
Victor Nasreddine, Joerg Stumbaum, Martin Hoch, Rainer Kalkofen, Ella Kriemen and Heiner Stange, Arlanxeo
Virtual Extrusion Laboratory Profile Die Module Provides Extrusion Optimization
Ben Chouchaoui, Windsor Industrial Development Laboratory
Dimensional Change Resulting from Swell and Drawdown of Extruded Polymers
James F. Stevenson, Stevenson PolyTech LLC
Custom HCR development: Thinking Outside the Conventional Silicone Box
Agnes M. Steckler and James M. Lambert, NuSil
Three-Dimensional Printing of Liquid Silicone Rubber using Liquid Additive Manufacturing
Rick Ziebell and Felipe Escamilla, R.D. Abbott
Tailoring the Properties of Hydrogenated Styrenic Block Copolymers for Medical Tubing Applications
Aparajita Bhattacharya, Bing Yang, Richard Ma and Stefan Karis, Kraton
Exploration of LPBd in HCR Silicone
Erick Sharp, Ace Products & Consulting
In Three Seconds, Predict the Dynamic Performance of Rubber
Ismail Saltuk and Nuri Akgerman, Tavdi Company, and Maxim Myslivets, LLC EMIRP
Effect of Planetary Roller Extruder on Filler Dispersion
Edward R. Terrill, Akron Rubber Development Laboratory, and Michael Batton and Ralf Quack, Entex Rust & Mitschke GmbH
Roll Mill Matic Single Step Mixing Line: A New Fully Automated Solution for the Mixing Room
Mario Sacchi, Comerio Ercole
High Heat Resistant EPDM Solution
Greg Li, Ray Laakso, Yuming Lai, Wenzhao Yang, Sharon Wu and Lena Nguyen, Dow Chemical
Sepiolite for Rubber Nanocomposites with High Mechanical Reinforcement and Low Dissipation of Energy
Maurizio Galimberti, Giulia Peli, Vincenzina Barbera and Daniele Locatelli, Politecnico di Milano, and Valeria Cipolletti and Luca Giannini, Pirelli Tire
A Novel Approach to Elucidate Size and Distribution of Carbon Black Aggregates by A Laser Diffraction Technique
Tapas R. Mohanty, S. Ramakrishnan, T.R. Gopalakrishnan, S.K.P. Amarnath, Daniele Lorenzetti and P.K. Mohamed, Apollo Tyres Ltd.
Cold Flow Index: An Important Processing Parameter for Polybutadiene Rubbers
S.L. Agrawal, S. Chatterjee, B.B. Sharma and Virendra Rathod, Reliance Industries Ltd.
Using Impera Performance Resins to Expand The “Magic Triangle” For Tire Tread Compounds
Mark T. Arigo, Eastman Chemical
Metal Oxide(S) to Reduce Rolling Resistance of Passenger Car Radial (PCR) Tires
Anup Mondal and Arup K. Chandra, Apollo Tyres Ltd.
Soybean Oil as a Replacement for Petroleum-Based Oils in Tire Tread Compounds
Lauren Brace and Bob Woloszynek, Goodyear Tire & Rubber
Functionalization: A Key Differential Factor in The Design of SSBRs for High Performance Tires
Luis Rodríguez-Guadarrama, John Kounavis and Julián Maldonado, Dynasol Group
Thermoplastic Elastomers for Automotive Applications: Keeping Emission and Odor Under Control
Andreas Domer, Florian Vetter, and Darijo Mijolovic, Kraiburg TPE
The Spectrum of Ionic Crosslinking with Zinc-Based Monomers
Philippe Lodefier and Steven K. Henning, Total Petrochemicals and Refining USA/Total Cray Valley
A New Prepolymer for Cast Elastomers with Unusual Properties: Urethane Systems with Low Compression Set and High Tear Resistance
Polina Ware and Gerry King, Lanxess
Antimicrobial Thermoplastic Elastomers: Strategic Pathways for The Future of Broad-Spectrum Anti-Infective Materials
Bharadwaja S.T. Peddinti, Frank Scholle, Reza G. Ghiladi and Richard J. Spontak, North Carolina State University
Water as the Solvent for “Oil-Based” Coatings
Jaddie Ho, Michael F. Cunningham and Philip G. Jessop, Queen’s University, Ontario, Canada
Effect of Epoxidation on the Dynamic Properties of Natural Rubber
J. Picken and P.J. Martin, Rubber Consultants, Tun Abdul Razak Research Center, U.K.
Defining Key Factors in Carbon Black-Filled NR/BR Compounds for Balancing Aircraft Tire Tread Properties
I. Indriasari, Wisut Kaewsakul, Wilma Dierkes and Anke Blume, University of Twente, The Netherlands
Overcoming Tear and Hot Tear Strength Issues in EPDM Compounds
Pete Spanos, Arlanxeo
Fault Detection in Rubber Injection Molding with Multivariate Statistics
I. Hutterer, Polymer Competence Center Leoben GmbH, and G.R. Berger-Weber and W. Friesenbichler, Injection Molding of Polymers, University of Leoben, Austria
Achieving Savings in the Post-Curing Process of Fluoroelastomer Compounds Prepared by Injection Molding
Mattia Ramini, Italian Gasket S.p.A., Gian Tommaso Viola and Luisa Paganin, Dott. Viola & Partners Chemical Research S.r.l., and Monica Battisti, Elastomers Union S.r.l.

Select your currency
USD United States (US) dollar
EUR Euro